Driveshaft Info
February 9th, 2009
Drive Shaft Lengths:
25″ - Disco 1, D90, 110, 130, D2 (although it is a different shaft), RRC with an LT230 transfer case (up to 1988). These shafts have the u- joints clocked about 40 degrees out of phase so these shafts do not work well in units with a standard driveshaft geometry.
26.75 - RRC with BW t/case and also clocked 40 degrees out of phase.
28 - D90 rear
34.5 - RRC, D1, D2 rear
21.75 - Series SWB rear
23.75 - Series front with 4 cylinder engine
Thanks to Bill Davis for the driveshaft lenghts info.
